The HabiStat Classic Pro Pulse Proportional Thermostat is an electronic thermostat that offers precise and consistent control for heat sources that don’t emit light, such as ceramic heaters and heat cables. Unlike on/off thermostats, this model maintains temperature by delivering rapid pulses of power to the heater, reducing fluctuations in temperature, which improves stability and parameters within the enclosure.
It supports a maximum load of 450 watts, making it suitable for a wide range of setups and heat sources, however the Classic Pro Pulse Thermostat is not suitable for use with light-emitting heat sources or deep heat projectors, as the pulsing action would cause visible flickering and reduce lamp lifespan. For controlling those kinds of lamp, we recommend the HabiStat Classic Pro Dimming Thermostat.
Designed with ease of use and reliability in mind, the Classic Pro Pulse Thermostat helps you maintain a safe and consistent thermal gradient—giving your animals the conditions they need to thrive.
The temperature measured at the sensor probe is clearly indicated on the LCD screen.
A heat indicator light shows when your thermostat is calling for heat and if the set temperature is exceeded by 3°C then ‘HHH’ will flash on the LCD display and the alarm will sound.
To set / change the temperature simply press or press and hold either the Up or Down indicator and easily increase/decrease your desired set temperature in increments of 0.1°C
The removable temperature sensor probe is waterproof and chemically resistant. Note, when the sensor probe is detached ‘EEE’ will flash on the LCD display and the alarm will sound. The probe has a suction cup to enable you to secure it to a smooth surface if required.
If you want to permanently fix the thermostat there is a choice of the locating tabs at both the top and bottom of unit or you can use double double sided tape to surface mount it.
Equipped with a super quick acting external fuse to ensure safety for your animals and equipment in the event of equipment failure. Only use ultra-rapid quick blow type FF3.15 amp for this thermostat. The maximum heating device load of 450 watts should not be exceeded.
This thermostat comes with a 12 month manufacturers guarantee.
View our full range of HabiStat Thermostats
View our Guide to Thermostat Selection
Downloads
HabiStat Pro Pulse Proportional Thermostat Instructions
Reviews
There are no reviews yet.